Mechanical Faculty

 

S.no Name Qualification Designation
1 Dr. R. Naveen Ph.D Professor & HOD
2 Dr. K. Satyanarayana Ph.D Professor
3 Dr. T. Srinivasarao Ph.D Professor
4 Dr. Md. K. M. Farookhi Ph.D Professor
5 Sri. P. V. S. Mohan Kumar M.Tech(Ph.D) Professor
6 Sri. P. Eswar Chandra Vidya Sagar M.Tech, (Ph.D) Professor
7 Dr. M. Kedar Mallik Ph.D Assoc. Professor
8 Sri. Sk. Abdul Munaf M.Tech, (Ph.D) Assoc. Professor
9 Sri. P. Nageswara Rao M.Tech, (Ph.D) Assoc. Professor
10 Smt. M. Lakshmi Vinitha M.Tech Asst. Professor
11 Sri. D. V. Seshagiri Rao M.Tech Asst. Professor
12 Smt. L. Lakshmi Aparna M.Tech Asst. Professor
13 Sri. Y. Prathapareddy M.Tech Asst. Professor
14 Sri. Syam Suman Jada M.Tech Asst. Professor
15 Sri. Ch. Suri Narayana M.Tech Asst. Professor
16 Sri. K. Madhusudhan Chowdary M.Tech Asst. Professor
17 Ms. P. Bhavyasri M.Tech Asst. Professor
18 Sri. B. Naga Babu M.Tech Asst. Professor
19 Sri. B. Aditya Mani Sai Pavan M.Tech Asst. Professor
20 Sri. V. Siva Kanna M.Tech Asst. Professor
21 Sri. N. Kishan M.Tech Asst. Professor
22 Ms. A. Swathi Bindu M.Tech Asst. Professor
23 Sri. T. Srinivasapavan M.Tech Asst. Professor
24 Sri. G. Venkata Amarnath M.Tech Asst. Professor
25 Sri. T. Praneeth Kumar M.Tech Asst. Professor
26 Sri. Ch. Raghavendra M.Tech Asst. Professor

Note: Please click on any faculty name to view thier complete profile

Dr. R. Naveen

Dr. R. Naveen
Professor & Director

B.Tech.: S.V.U. College of Engineering, Tirupati, 1988

M.Tech: Indian Institute of Technology (IIT), Delhi, 1989

Ph.D: Andhra University, Visakhapatnam, 2006.

Teaching Experience: 26 years

Professional Affiliations: MISME, MISTE

Awards and Recognitions: Obtained a Percentile of 95.04 (an All India Rank of 52) at the Graduate Aptitude Test for Engineers (GATE) in the year 1988

Fields of Specialization: Production Engineering, Metal Cutting and Machine Tools, CAD/CAM, Flexible Manufacturing Systems

Journal Papers:

  1. "Automated Routes Generation for Scheduling of AGV Systems in FMS", Proceedings of the National Symposium on 'Manufacturing Technologies for the Nineties', REC Warangal, November 1991, p 99.
  2. "A Simulation Package for Scheduling and Design of AGV Systems for FMS", Proceedings of the International Conference on 'CAD, CAM, Robotics and Autonomous Factories' IIT Delhi, December 1993, Vol. 1, p 321.
  3. "Development of an APT Processor and Post Processor for Turned Components", Proceedings of the X ISME Conference, Delhi College of Engineering, Delhi, December 1996.
  4. "Graphical Simulation of Automated Guided Vehicle Systems for Flexible Manufacturing Systems", Proceedings of the 17th All India Manufacturing Technology Design and Research Conference, REC Warangal, January 1997.
  5. "Designing the Layout of Single and Multi-row Flexible Manufacturing Systems by Ant Colony Optimisation Meta Heuristic", International Journal of Advanced Manufacturing Systems, Vol. 2, 2010, p 107.
  6. "Design of Single Row Facility Layout", Acharya Nagarjuna University Journal of Engineering and Technology, June 2010, Vol. 2, No. 1, p 41.
  7. "Modelling and Simulation of Row based Flexible Manufacturing Systems", International Journal of Applied Engineering Research, Vol. 6, No. 80, p 1483, 2011.
  8. "Design of Row based Flexible Manufacturing Systems", International Journal of Manufacturing Science and Technology, Vol. 5, No. 1, p 35, 2011.
  9. "Determination of Buffer size in single and multi-row Flexible Manufacturing Systems through simulation", International Journal of Engineering Science and Technology, May 2011,Vol. 3, No. 5, p 3889.
  10. "Study of the effect of processing time on buffer size in Flexible Manufacturing Systems", International Journal of Advanced Manufacturing Systems, 2013, Vol. 4, No. 1, p 53.
  11. "Simulation based layout design of large sized multi-row FMS", Journal of Engineering & Architecture, pp. 01-20, Vol. 1., Issue 1, 2013.
  12. "Row based layout design of medium size flexible manufacturing systems", Reason A Technical Journal, 2014, Vol. 13, pp 61-70.

Conference Papers:

  1. "Scheduling of Automated Guided Vehicle Systems for Flexible Manufacturing Systems", Proceedings of the National Conference on "Advanced Trends in Mechanical Engineering Design and Research Conference", JNTU College of Engineering, Ananthapur, December, 2002
  2. "Back Tracking Search for Routes Generation of Automated Guided Vehicle Systems in Flexible Manufacturing Systems", International Conference on "Agile Manufacturing for Cleaner Products and Sustainability Internet Solutions", Centre for Agile Manufacturing Research and Development, Bangalore University and World Federation of Engineering Organisation, December, 2002
  3. "A Genetic Algorithm Approach for the Design of Single and Multi-Row Flexible Manufacturing Systems", Proceedings of the 3rd International and 24th AIMTDR Conference, College of Engineering, Andhra University, Visakhapatnam, December 2010, Vol. 1, p 483.
  4. "Quantitative Analysis of Automated Guided Vehicles in Flexible Manufacturing Systems", 3rd International and 24th AIMTDR Conference, College of Engineering, Andhra University, Visakhapatnam, December 2010 (Poster Presentation)
  5. "Design of Machine Layout in Flexible Manufacturing Systems", Proceedings of the International Conference on Recent Advances in Mechanical Engineering, INCRAME2011 held at Dr. M.G.R.University, Chennai, April 2011.
  6. "Simulation based layout design of single and Multi row Flexible Manufacturing Systems", International Simulation Conference of India, ISCI 2012, IIT Bombay, Feb. 2012, paper No. 29.
  7. "A comparative study of GA and ACO for large size FMS Layouts", Proceedings of 4th International and 25th AIMTDR Conference, December 2012, Jadavpur University..

-------------------------------------------------------------------------------------------------------------------

Dr. K. Satyanarayana

Dr. K. Satyanarayana
Professor

A.M.I.E.: Institution of Engineers (India),Kolkata, 1996

M.E.: Moulana Azad National Institute of Technology, Bhopal, 1999

Ph.D: Andhra University, Visakhapatnam, 2015.

Teaching Experience: 15 years

Professional Affiliations: MIE

Fields of Specialization: Machine Design, Condition Monitoring

Journal Papers:

  1. Condition monitoring of a turbine using echo state neural net work, European journal of scientific research, Sep. 2012.
  2. Implementation locally weighted projection regression network for condition monitoring of steam turbine, CIIT journal of artificial intelligence and machine learning, Vol. 4, No. 10, 2012.

Conference Papers:

  1. Implementation of fault identification in a steel turbine using wavelet decomposition, 27-29, Nov. 2014, International conference on industrial mechanical and production engineering – advancements and current trends, MANIT Bhopal.

-------------------------------------------------------------------------------------------------------------------

Dr. T. Srinivasa Rao

Dr. T. Srinivasa Rao
Professor

B.Tech: Bapatla Engineering College, Nagarjuna University, 1996

M.E: PDA College of Engineering, Gulbarga, Gulbarga University, 1999

Ph.D: Jawaharlal Nehru Technological University Kakinada (JNTUK), 2015

Teaching Experience: 17 years

Professional Affiliations: LMISTE

Fields of Specialization: Thermodynamics, Heat Transfer, Internal Combustion Engines, Fluid Mechanics

Journal Papers:

  1. "Effect of Co-flow on near field shock structure" Transactions of ASME, Journal of Fluids Engineering, July, 2012, Vol. 134/074501
  2. "Characteristics of Co-flow jets from orifices", DEGRUYTER, International Journal of Turbo and Jet Engines, June, 2013, Vol.31, Issue 2, PP. 141-148
  3. "Characteristics of underexpanded Co-flow jets", International journal of Applied Mechanics and Materials, June 2014, Vol. 575, PP> 507.

Conference Papers:

  1. "Matching of Fuel Injection equipment and combustion chamber towards emission reduction of a Diesel engine" TAME, December 2-3, 2005, SNIST, Hyderabad.

-------------------------------------------------------------------------------------------------------------------

Mr. P. V. S. Mohan Kumar

Mr. P. V. S. Mohan Kumar
Professor and Head

B.Tech.: Shyamlal College Of Engineering, Marathwad University,1988

M.Tech: Nationnal Institute of Technology,warangal, Kakatiya University,1991

Teaching Experience: 25 years

Industrial Experience: 8 Months

Professional Affiliations: ISTE

Awards and Recognitions: "BEST PROJECT AWARD in B.Tech. for the project titled "Design and Fabrication of pick and place Robot" by Marathwada University.

GATE Score 89.98 Percentile in 1989.

The Project work titled "Design of a fixture for twisted profile turbine blade" done in M.Tech. was considered for implementation in B.H.E.L, Hyderabad

Fields of Specialization: DESIGN AND PRODUCTION OF MACHINE TOOLS

Journal Papers:

  1. "Development of an expert system for the selection of end effectors" International journal of advances in computer, electrical and electronics engineering, Vol. 2, Dec 2012
  2. "Development of an expert system for the selection of the Robotic system", International journal of technology and engineering science, Vol.2 (3), April 2014, Page 1528 to 1540.

Conference Papers:

  1. "Development of an expert system for the selection of manipulators", December 2012, National Conference on image processing and application, VVIT, Guntur.
  2. "Development of an expert system for the selection of Robots used in manufacturing" at National conference on Factory automation, Robotics & Soft Computing" during 18th and 19th January 2007 at NIT Warangal.
  3. "Application of an Expert System Used for the Selection of Sensors Using Predicate Logic in a Robot System used in Manufacturing" at 23rd National convention of Mechanical Engineers & National Seminar on "Emerging Trends in Manufacturing Systems and Technologies". Page No:5.33-5.37.
  4. "Application of expert system for the selection of Robot end effector" at National conference on Recent advances in Computer aided engineering (RACE 06) during 2nd to 4th March 2006 at O.U. Hyderabad.
  5. "Application of expert systems to casting processes" at 17th AIMTDR Conference during 9th to 11th January 1997 at NIT Warangal.
  6. "Maintenance of quality and standards for technical education" at 26th ISTE annual convention during 4th to 6th January 1997 at REC Bhopal.
  7. "Special equipment design for central drilling in precision forged blades" at National Symposium on manufacturing technologies for nineties in November 1992.

-------------------------------------------------------------------------------------------------------------------

Dr. Md. K. M. Farookhi

Dr. Md. K. M. Farookhi
Professor

B.E.: Osmania University, 1994.

M.B.A.: Acharya Nagarjuna University, 1998.

M.Tech: V R Siddhartha Engineering College, Vijayawada 2005.

Teaching Experience: 16 years

Professional Affiliations: MIE

Fields of Specialization: Production Technology, Metallurgy MaterialScience, Industrial Engineering & Mangament

Journal Papers:

  1. Md. Khaja Moinuddin Farokhi and T N Murty “Factors Influencing Organizational Climate” Abhinav- International Monthly Refereed Journal of Research in Management & Technology, ISSN-2320-0073 Vol. II, Dec’13, Impact Factor 0.0812 (2012), Mumbai, www.abhinavjournal.com
  2. Md. Khaja Moinuddin Farokhi and T N Murty “Dimensions of Organizational Climate” Intercontinental Journal of Human Research Review (Print). www.icmrr.org ISSN 2347-1662. Bangalore
  3. Md Khaja Mouinddin Farokhi, T N Murty and S. Annapurna, “Attrition of Employees in Indian IT Sector ” , Intercontinental Journal of Human Research Review (Print), Impact Factor: 0.615, ISSN 2347-1662,P:1-15,Vol.2 Issue-9, October.2014, Bangalore, www.icmrr.org

-------------------------------------------------------------------------------------------------------------------

Mr. P. Eswara Chandra Vidya Sagar

Mr. P. Eswara Chandra Vidya Sagar
Professor

B.Tech.: V.R.Siddhartha Engineering College, ANU, 1985.

M.Tech: Jadavpur University Kolkata,1985.

Teaching Experience: 9 years

Industrial Experience: 18 years

R&D Projects: Tribology of Artificial Human joints

Fields of Specialization: Machine Design, FEM, Computer Graphics

Journal Papers:

  1. "Wear studies of frequently used implant materials" in a Bi-anual journal published by the society for Bio materials and artificial organs, Dec 2002.

-------------------------------------------------------------------------------------------------------------------

Mallik

Dr. M. Kedar Mallik
Associate Professor

A.M.I.E.: Institution of Engineers (India), Kolkata, 2005

M.Tech: V.R.Siddhartha Engineering College, Vijayawada, 2008

Ph.D.: Andhra University, Visakhapatnam, 2015

Teaching Experience: 11 years

Industrial Experience: 6 years

Professional Body Memberships: AMIE, MISTE, MCMSI, MIIPE, MEDAF, MPMAI, MIAEng., SMIRED

Professional Affiliations:

  • Honorary Editorial Member for Journal of Production Research and Management
  • Honorary Editorial Member for Trends in Mechanical Engineering & Technology.

    Fields of Specialization: Production Engineering, Automobile Engineering, Material Science

    Journal Papers:

    1. "Optimization of speed parameters in Burnishing of samples fabricated by Fused Deposition Modeling", International Journal of Mechanical and Industrial Engineering (IJMIE), Volume-2, Issue-2, 2012
    2. "Characterization of materials used in Laser Engineered Net Shaping through microstructure analysis a review", Trends in machine design (STM) Vol. 1, Issue 1, pages 5-8, 2014
    3. "Laser deposited Co-Cr-Mo alloy, microstructure, wear and electrochemical properties" Journal of Material Research (Material Research Society) Vol. 29, No. 17, Sep. 2014, pages 2021-2027 Impact factor: 1.713
    4. "Additive Manufacturing of Co-Cr-Mo alloy influence of heat treatment on microstructure, tribological and electrochemical properties", Computer aided and digital manufacturing technologies (Frontiers in mechanical engineering) Vol. 1, Article 2, March 2015.
    5. "Microstructure and tribological properties of weld deposited Co-Cr-Mo alloy", Journal of Manufacturing Science and Production (De Gruyter) Vol.15, Issue 2, May 2015, Pages 239-241.
    6. "Effect of Burnishing on the Surface Quality and Hardness of ABS Plastic Samples Fabricated with Fused Deposition Modeling" Journal of Production Research & Management, Volume 5, Issue 1, April, 2015.
    7. "Application Oriented Approach of Layered Manufacturing in Biomedical and Engineering Fields: A Review" Journal of Materials and Metallurgical Engineering , Volume 5, Issue 2, July, 2015.
    8. "Effect of heat treatment on hardness and wear behavior of weld deposited Co-Cr-Mo alloy" Revista Materia , Volume 20, No.2, 2015, Pages 544-549, Impact factor 0.12, H5 index- 6.

    Conference Papers:

    1. Presented a paper titled "Simulation of services in supermarket using Flexsim", in the National Conference at PVPSIT, Vijayawada on 11th January 2008.
    2. Presented a paper titled "A modeling approach to the customer satisfaction level under demand uncertainty using Flexsim", in TEAMTECH2008 an International conference at IISc, Bangalore held from 22nd to 24th September 2008.
    3. Presented a paper titled "Optimization of speed parameters in burnishing of samples fabricated by Fused Deposition Modeling", in the International Conference on Mechanical & Industrial Engineering in Guntur on 9th September, 2012.
    4. Presented a paper titled "Effect of heat treatment on hardness of Co-Cr-Mo alloy deposited with Laser Engineered Net Shaping", in Global Congress on Manufacturing and Management (GCMM 2014), VIT, Vellore, Published in Procedia engineering Vol. 97, 2014, pages 1718-1723 Elsevier.
    5. Presented a paper titled "Effect of heat treatment on corrosion behavior of LENS deposited Co-Cr-Mo alloy", in the International Conference PM16, organized by Powder Metallurgy Association of India at Pune from 20th to 22nd Fabruary, 2016.
    6. Presented a paper titled "Influence of heat treatment on corrosion behavior of weld deposited Co-Cr-Mo alloy", in the International Conference ICPER2016, organized by University Teknology Petronos, Kualalampur, Malaysia from 15th to 17th August 2016, Published in ARPN Journal of Engineering and Applied Sciences, Volume 11, No. 20, Pages 12188 - 12191.
    7. Co-Authored a paper titled "Application of Modularity in the Piston pump assembly line of a Hydraulic System", in the International Conference ICPER2016, organized by University Teknology Petronos, Kualalampur, Malaysia from 15th to 17th August 2016, Published in ARPN Journal of Engineering and Applied Sciences, Volume 11, No. 20, Pages 12202 - 12205.

-------------------------------------------------------------------------------------------------------------------

Mr. Sk. Abdul Munaf

Mr. Sk. Abdul Munaf
Associate Professor

B.Tech: Koneru Lakshmaiah College of Engineering(KLCE), Acharya Nagarjuna University, 2003

M.Tech: V.R.Siddhartha Engineering College, Vijayawada, 2008

Teaching Experience: 10 years

Professional Affiliations: MIAEng

Fields of Specialization: Production Engineering, Robotics, Nano Technology, Material Science

Journal Papers:

  1. Development of modular manufacturing systems: a review, The international journal of advanced manufacturing technology (Springer) Vol. 76, pages 789-802, 2015

Conference Papers:

  1. Development of Empirical Relations at Optimal Parameters Evaluation for machining Copper with Wire Electrical Discharge Machining (WEDM), National Conference at ICAME-07 Manipal-Karnataka 24-26 Oct-07
  2. Optimal Parametric Evaluation and Wire selection for machining Tungsten Carbide using CNC Wire cut Electrical Discharge Machine, International Conference at ICETAETS-2008-Rajkot, Sourastra University-Gujarat 13-14th Jan-08.
  3. Application and analysis of Modularity in assembly unit of Drying and Distribution Unit of braking system of an automobile, Int. Conf. on Industrial, Mechanical and Production Engineering: Advancements and Current TrendsDepartment of Mechanical Engineering, MANIT, Bhopal,November 27-29, 2014.

-------------------------------------------------------------------------------------------------------------------

Mr. P. Nageswara Rao

Mr. P. Nageswara Rao
Associate professor

B.Tech.: Jawaharlal Nehru Technological University ANATHAPUR (A), 2002

M.Tech: Osmania University(A), 2005

Teaching Experience: 9 years

Fields of Specialization: Mechanics of solids,Engg.Mechanics,Engg.Drawing,Design of Press Tools

-------------------------------------------------------------------------------------------------------------------

Ms. M. Lakshmi Vinitha

Ms. M. Lakshmi Vinitha
Assistant Professor

B.E.: Sri Padmavati College of Engineering, University of Madras, 2004

M.Tech: Nimra College of Engineering, Vijayawada, 2012

Teaching Experience: 6 years

Awards and Recognitions: Received the best paper and Young investigator award in International Conference

Fields of Specialization: CAD/CAM, Metrology, Fluid Mechanics & Hydraulic Machinery, Rapid Prototyping

Journal Papers:

  1. "Optimization of speed parameters in Burnishing of samples fabricated by Fused Deposition Modeling", International Journal of Mechanical and Industrial Engineering (IJMIE), Volume-2, Issue-2, 2012
  2. "Effect of Burnishing on the Surface Quality and Hardness of ABS Plastic Samples Fabricated with Fused Deposition Modeling" Journal of Production Research & Management, Volume 5, Issue 1, April, 2015.

Conference Papers:

  1. "Optimization of speed parameters in burnishing of samples fabricated by Fused Deposition Modeling", International Conference on Mechanical & Industrial Engineering in Guntur on 9th September, 2012.

-------------------------------------------------------------------------------------------------------------------

Mr. D. V. Seshagiri Rao

Mr. D. V. Seshagiri Rao
Assistant Professor

B.Tech.: Loyola Institute of Technology and Management,JNTUH,2008

M.E.: University college of Engineering,Osmania University,2010

Teaching Experience: 3 years

Fields of Specialization: Tool Design,Press Tools,Fixture Design

-------------------------------------------------------------------------------------------------------------------

Ms. L. Lakshmi Aparna

Ms. L. Lakshmi Aparna
Assistant Professor

B.Tech: Narasaraopet Engineering College, Guntur, JNTUK, 2009

M.Tech: RVR & JC College of Engineering, Guntur,ANU, 2011

Teaching Experience: 4 years

Fields of Specialization: CAD/CAM

Conference Paper:

  1. "A Fatigue testing of continuous GFRP composites using Digital Image corelation (DIC) Technique", International Conference on material processing & characterization (ICMPC)) at GRIET, Hyd, Mar. 2014

-------------------------------------------------------------------------------------------------------------------

Swathi Bindu

Name of the faculty
Assistant Professor

B.Tech.: Details

M.E.: Details

Teaching Experience: no of years

Fields of Specialization:his/her field of specialization

Journal Papers:

  1. Details
  2. Details

Conference Papers:

  1. details
  2. details
  3. details

-------------------------------------------------------------------------------------------------------------------

Swathi Bindu

Name of the faculty
Assistant Professor

B.Tech.: Details

M.E.: Details

Teaching Experience: no of years

Fields of Specialization:his/her field of specialization

Journal Papers:

  1. Details
  2. Details

Conference Papers:

  1. details
  2. details
  3. details

-------------------------------------------------------------------------------------------------------------------

Swathi Bindu

Name of the faculty
Assistant Professor

B.Tech.: Details

M.E.: Details

Teaching Experience: no of years

Fields of Specialization:his/her field of specialization

Journal Papers:

  1. Details
  2. Details

Conference Papers:

  1. details
  2. details
  3. details

-------------------------------------------------------------------------------------------------------------------

Mr. K. Madhusudhan Chowdary

Mr. K. Madhusudhan Chowdary
Assistant Professor

B.Tech.: RVR & JC College of Engineering, Acharya Nagarjuna University, 2011

M.Tech: K L Univesity, 2013.

Teaching Experience: 1 year

Awards and Recognitions: Acheived Silver Medal in acadamic excellence in M. Tech

Fields of Specialization: CAD/CAM, CIM, Product Design

Journal Papers:

  1. Details
  2. Details

Conference Papers:

  1. details
  2. details
  3. details

-------------------------------------------------------------------------------------------------------------------

Swathi Bindu

Name of the faculty
Assistant Professor

B.Tech.: Details

M.E.: Details

Teaching Experience: no of years

Fields of Specialization:his/her field of specialization

Journal Papers:

  1. Details
  2. Details

Conference Papers:

  1. details
  2. details
  3. details

-------------------------------------------------------------------------------------------------------------------

Mr. B. Naga Babu

Mr. B. Naga Babu
Assistant Professor

B.Tech.: MIC College of Technology, JNTUK, 2011

M.Tech: Lakireddy Bali Reddy College of Engineering (A), 2014.

Teaching Experience: 1 year

Fields of Specialization: Thermal Engineering, Heat Transfer

-------------------------------------------------------------------------------------------------------------------

Mr. B. Aditya Mani Sai Pavan

Mr. B. Aditya Mani Sai Pavan
Assistant Professor

B.Tech..: Loyola Institute of Technology and Management, JNTUK, 2013

M.Tech: Veltech Technical University, Chennai, 2015.

Teaching Experience: 3 Months

Fields of Specialization: Machine Design

-------------------------------------------------------------------------------------------------------------------

Mr. V. Siva Kanna

Mr. V. Siva Kanna
Assistant Professor

B.Tech: Sri Saradhi Institute of Engineering and Technology, JNTUK, 2013

M.Tech: B.V.C Engineering College,JNTUK, 2015.

Teaching Experience: 3 Months

Fields of Specialization: Thermal Engineering

-------------------------------------------------------------------------------------------------------------------

Mr. N. Kishan

Mr. N. Kishan
Assistant Professor

B.E..: THANGAVELU ENGINEERING COLLEGE, MADRAS UNIVERSITY, CHENNAI, 2004

M.Tech: HINDUSTAN ENGINEERING COLLEGE,ANNA UNIVERSITY ,2010.

Teaching Experience: 3 Months

Fields of Specialization: IC ENGINES

-------------------------------------------------------------------------------------------------------------------

Swathi Bindu

Name of the faculty
Assistant Professor

B.Tech.: Details

M.E.: Details

Teaching Experience: no of years

Fields of Specialization:his/her field of specialization

-------------------------------------------------------------------------------------------------------------------

Swathi Bindu

Name of the faculty
Assistant Professor

B.Tech.: Details

M.E.: Details

Teaching Experience: no of years

Fields of Specialization:his/her field of specialization

-------------------------------------------------------------------------------------------------------------------

Swathi Bindu

Name of the faculty
Assistant Professor

B.Tech.: Details

M.E.: Details

Teaching Experience: no of years

Fields of Specialization:his/her field of specialization

-------------------------------------------------------------------------------------------------------------------

Swathi Bindu

Name of the faculty
Assistant Professor

B.Tech.: Details

M.E.: Details

Teaching Experience: no of years

Fields of Specialization:his/her field of specialization

-------------------------------------------------------------------------------------------------------------------

Swathi Bindu

Name of the faculty
Assistant Professor

B.Tech.: Details

M.E.: Details

Teaching Experience: no of years

Fields of Specialization:his/her field of specialization

-------------------------------------------------------------------------------------------------------------------

Vconnect Forum

Address and Phone

Vasireddy Venkatadri Institute of Technology
Nambur (V)
Peda Kakani (Md)
Guntur (Dt)
Andhra Pradesh
522508 

0863 2293 336
info@vvitguntur.com

Website By

webstudio2.png