1. Personal Information
Name |
Dr. Mantrala Kedar Mallik |
Designation |
Professor |
Qualification |
A.M.I.E., M. Tech., Ph.D. |
Department |
Mechanical Engineering |
|
This email address is being protected from spambots. You need JavaScript enabled to view it. This email address is being protected from spambots. You need JavaScript enabled to view it. |
Phone Number |
+91 92464 00126 +91 98487 30622 |
Google Scholar Link | https://scholar.google.com/citations?hl=en&user=FF7xSp0AAAAJ |
ORCId. | 0000-0002-7543-9742 |
2. Academic Information
Name of the Degree |
Name of the College |
Name of the University |
Year of Passing |
Specialization |
Ph.D. |
Andhra University College of Engineering (Autonomous), Visakhapatnam. | Andhra University | 2015 | Material Characterization, Metal 3D Printing |
M.Tech. | V R Siddhartha Engineering College, Vijayawada | Acharya Nagarjuna University | 2008 | Production Engineering |
A.M.I.E. | Institution of Engineers (India), Kolkata | Institution of Engineers (India), Kolkata | 2005 | Mechanical Engineering |
Diploma | VKR & VNB Polytechnic, Gudivada | SBTET, A.P. | 1994 | Automobile Engineering |
3. Experience (Teaching/Industry/R&D)
SNO |
Period |
Designation |
Name of Organization |
Experience |
|
From |
To |
||||
1 |
September, 1994 |
August,1999 | Clerk | Madras Auto Service, Hyderabad | 5 Years |
2 |
September, 1999 |
June, 2005 |
Proprietor |
Sree Service Syndicate, Vijayawada |
6 Years |
3 | July, 2005 | February, 2006 | Associate Lecturer | VKR & VNB Polytechnic, Gudivada | 1 Year |
4 | February, 2006 | May, 2008 | Lecturer | K L College of Engineering, Vaddeswaram | 2 Years |
5 | May, 2008 | February, 2012 | Assistant Professor | Guntur Engineering College, Guntur | 4 Years |
6 | March, 2012 | June, 2015 | Assistant Professor | V V I T | 3 Years |
7 | July, 2015 | June, 2021 | Associate Professor | V V I T | 6 Years |
8 | July, 2021 | Till Date | Professor | V V I T |
4. Publications
International Journals
SNO |
Title |
Year |
Name of Journal |
Issue No |
Vol No |
Page No |
ISSN NO |
1 |
Characterization of materials used in Laser Engineered Net Shaping through microstructure analysis – a review |
2014 |
Trends in Machine Design (STM) |
1 |
1 |
5-8 |
2455-3352 |
2 | Laser deposited Co-Cr-Mo alloy, microstructure, wear and electrochemical properties, | 2014 | Journal of material research (Material research society) Scopus, SCIE, SJRQ1 | 17 | 29 | 2021-2027 | 0884-2914 |
3 | Additive Manufacturing of Co-Cr-Mo alloy influence of heat treatment on microstructure, tribological and electrochemical properties | 2015 | Computer aided and digital manufacturing technologies (Frontiers in mechanical engineering) | 2 | 1 | -- | 2297-3079 |
4 | Microstructure and tribological properties of weld deposited Co-Cr-Mo alloy | 2015 | Journal of Manufacturing Science and Production (De Gruyter) | 2 | 15 | 239-241 | 2191-0375 |
5 | Effect of Burnishing on the Surface Quality and Hardness of ABS Plastic Samples Fabricated with Fused Deposition Modeling | 2015 | Journal of Production Research & Management, | 1 | 5 | 8-13 | 2347-9930 |
6 | Effect of heat treatment on hardness and wear behavior of weld deposited Co-Cr-Mo alloy | 2015 |
Revista Materia Scopus, SJR Q3 |
2 | 20 | 544-549 | 1517-7076 |
7 | Application Oriented Approach of Layered Manufacturing in Biomedical and Engineering Fields: A Review | 2015 | Journal of Materials and Metallurgical Engineering | 2 | 5 | 39-51 | 2321-4236 |
8 | Prediction of durability of human hip joint implants by MATLAB | 2017 | Research & Reviews: A Journal of Life Sciences | 7 | 2 | 1-8 | 2348-9545 |
9 | Laser Engineered Net Shaping process in development of bio-compatible implants: An overview | 2017 | Journal of Advanced Research in Dynamical and Control System Scopus Indexed | 9 | Sp. 14 | 745-755 | 1943-023X |
10 | A Review on Development of Medical Implants by Rapid PrototypingTechnology |
2017 |
International Journal of Pure and Applied Mathematics |
21 | 117 | 257-276 | 1314-3395 |
11 | Electro Chemical Behaviour of LENSTM Deposited Co-Cr-W Alloy for Bio-Medical Applications | 2018 | International Journal of Mechanical and Production Engineering Research and Development - Scopus Indexed | Special Issue, | 41-52 | 2249-8001 | |
12 | Processing & Characterization of LENSTM Deposited Co-Cr-W Alloy for Bio-Medical Applications | 2018 | International Journal of Pharmaceutical Research - Scopus Indexed | 1 | 10 | 276-285 | 0975-2366 |
13 | Bio-Compatible Processing of LENSTM Deposited Co-Cr-W alloy for Medical Applications | 2018 | International Journal of Engineering & Technology | 7 | 2.20 | 362-366 | 2227-524X |
14 | Effect of Process Parameters on the Tensile Properties of LENS deposited Co-Cr-Mo alloy | 2018 | International Journal of Manufacturing Technology and Management - Scopus Indexed & SJR Q3 |
6 | 32 | 509-516 | 1741-5195 |
15 | Analysis and Optimization of Single Cylinder IC Engine Connecting Rod | 2018 | Journal of Catalyst and Catalysis (STM) | 2 | 5 | 26-33 | 2349-4344 |
16 | Hardness, Wear and Corrosion Properties of Co-Cr-W Alloy Deposited with Laser Engineered Net Shaping in Medical Applications | 2019 | International Journal of Innovative Technology and Exploring Engineering - Scopus Indexed | 8 | 8 | 2951-2955 | 2278-3075 |
17 | Electro Chemical Behavior of Different Metals in Sodium Chloride Solution | 2019 | International Journal of Emerging Trends in Engineering Research - Scopus Indexed | 7 | 11 | 715-719 | 2347-3983 |
18 | Diverse Electro-Chemical Techniques and Applications of Aluminium with 3.5 percent Sodium Chloride Solution | 2020 |
Solid State Technology SJR Q4
|
63 | 5 | 3901-3910 | 0038-111X |
19 | Corrosion Behavior of LENS Deposited CoCrMo Alloy Using Bayesian Regularization‑Based Artificial Neural Network (BRANN) | 2021 | Journal of Bio and Tribo corrosion Springer link, SJR Q2 |
3 | 7 | Article No. 116 | 2198 - 4220 |
20 | Characterization of Tribological and Mechanical Properties of SS304 coated with Co-Cr-Mo alloy with 5% HCl solution | 2022 | ARPN Journal of Engineering and Applied Science, Scopus, SJR Q3 | 19 | 16 | 1973 - 1977 | 1819 - 6608 |
21 | Prophecy of wear rate and microhardness of commercial materials by experimentation and artificial neural networks | 2022 | Journal of Engineering Science and Technology, Web of Sciences Indexed, SJR Q3 | 5 | 17 | 3600 - 3618 | 1823 - 4690 |
22 | Hybrid swarm based intelligent algorithm for lattice structure optimization in additive manufacturing system | 2022 | International journal of Interactive design and manufacturing, Springer, Web of Sciences Indexed, SJR Q2 | Published on 28/03/2022 | 1955 - 2505 | ||
23 | Experimental evaluation of additively deposited functionally graded material samples-microscopic and spectroscopic analysis of SS-316L/Co-Cr-Mo alloy | 2022 | AIMS Materials Science, Web of Sciences Indexed, SJR Q2 | 4 | 9 | 653-667 | 2372-0484 |
24 | Tensile, hardness and metallurgical analysis of laser cured Co-Cr-Mo alloy samples | 2022 | Advances in Materials and Processing Technologies (T&F), Web of Sciences Indexed, SJR Q2 | Published on 09/09/2022 | 2374-0698 | ||
25 | Investigation of Impact Strength, Micro Hardness and Metallurgical Analysis of DMLS Fabricated CoCrMo Alloy Samples | 2022 | Lasers in Manufacturing and Materials Processing, Springer, Scopus, SJR Q2 | Published on 01/11/2022 | 2196-7229 | ||
26 | Evaluation of Compression, Wear and Electrochemical Behavior of CoCrMo Alloy Samples Fabricated with Direct Metal Laser Sintering | 2022 | Journal of Material Engineering and Performance, Springer, SCIE Indexed, SJR Q2 | Published on 28/11/2022 | 1059-9495 |
ConferencePapers Published in Journals
Sl. No. | Title of the Paper | Year | Name of the Journal | Issue No. | Vol. No. | Page No. | ISSN |
1 | Optimization of speed parameters in Burnishing of samples fabricated by Fused Deposition Modeling | International Journal of Mechanical and Industrial Engineering (IJMIE) | 2 | 2 | 10-12 | 2231 –6477 | |
International Conference on Mechanical & Industrial Engineering | 2012 | IRNet, Guntur | |||||
2 | Effect of heat treatment on hardness of Co-Cr-Mo alloy deposited with Laser Engineered Net Shaping | Procedia engineering (Elsevier) Scopus indexed | 97 | 1718-1723 | 1877-7058 | ||
GCMM2014 | 2014 | VIT Vellore | |||||
3 | Effect of Heat treatment on Corrosion Behavior of Weld deposited Co-Cr-Mo Alloy | ARPN Journal of Engineering and Applied Sciences Scopus, SJR Q3 | 20 | 11 | 12188-12191 | 1819-6608 | |
ICPER 2016 | 2016 | Universiti Technologi Petronos, Malaysia | |||||
4 | Application of modularity in a piston pump assembly line of a hydraulic system | ARPN Journal of Engineering and Applied Sciences Scopus, SJR Q3 | 20 | 11 | 12202-12205 | 1819-6608 | |
ICPER 2016 | 2016 | Universiti Technologi Petronos, Malaysia | |||||
5 | Characterization and Wear Properties of Co-Cr-W alloy Deposited with Laser Engineered Net Shaping | International Journal of Recent Technology and Engineering (IJRTE) - Scopus Indexed | 4 | 7 | 151-155 | 2277-3878, | |
ICRACMEP | 2018 | VVIT | |||||
6 | Prediction of Corrosion Properties of LENSTM Deposited Cobalt, Chromium and Molybdenum Alloy Using Artificial Neural Networks | International Journal of Materials and Product Technology (Inderscience) SCIE Indexed, SJR Q3 | 1/2/3 | 62 | 4-15 | 0268-1900 | |
ICPCM | 2019 | National Institute of Technology, Rourkela | |||||
7 | Prediction about th influence of Nano Graphene particles on Tribological properties of Steel under dry and wet conditions | AIP Conference Proceedings, Scopus, Web of Sciences Indexed | 2327 | 20007 | 0094 243X | ||
ICMSS | 2020 | Surya Engineering College, Erode | |||||
8 | Prediction of influence of Co-Cr-Mo alloy coating on the wear rate of Aluminium with HCl solution | Materials Today Proceedings, Scopus, Web of Sciences Indexed | Part 2 | 42 | 1287 - 1296 | 2214-7853 | |
ICRAMM | 2020 | Velalar Institute of Technology, Erode | |||||
9 | Applications of Direct Mtal Laser Sintering Process in Engineering and Medical Fields - A Review | YMER - An INternational Journal | 10 | 21 | 1229 - 1237 | 0044-0477 | |
NCAMMME | 2020 | Vignan university, Guntur | |||||
10 | Investigation of Electro-chemical performance of AZ31 Magnesium alloy – CaSiO3 Metal Matrix Composites in different environments | IOP Conference series - Materials Science and Engineering, Web of Sciences Indexed | 1112 | 12002 | 1757 - 899X | ||
ICI4TCME | 2021 | Vasireddy Venkatadri Institute of Technology, Guntur | |||||
11 | Comparison of Effect of Orientation on SS304 and SS316 Material Samples Fabricated with DMLS Technology | IOP Conference series - Materials Science and Engineering, Web of Sciences Indexed | 1112 | 12014 | 1757 - 899X | ||
ICI4TCME | 2021 | Vasireddy Venkatadri Institute of Technology, Guntur | |||||
12 | Ex Situ Tribological and Electro-chemical Analysis of Aluminium | IOP Conference series - Journal of Physics: Web of Sciences Indexed | 2070 | 12205 | 1742 - 6596 | ||
ICAPSM 2021 | 2021 | SNS College of Technology, Coimbatore | |||||
13 | Characterisation of Al-6061-T6 metal matrix composites reinforced with rice husk ash and Bakelite powder |
Materials Today: Proceedings Scopus indexed | In Press | ||||
ICMISM | 2022 | Sri Vishnu Institute of Technology, Bhimavaram | |||||
14 | Investigation of Metallurgical and Mechanical Properties of DMLS Fabricated Inconel 718 | AIP Conference Proceedings | 2810 | 1 | 120006 |
1551 - 7616
|
|
ICSMS | 2022 | Vasireddy Venkatadri Institute of Technology, Guntur |
International Conferences
SNO |
Title |
Year |
Name of Proceedings |
Name of Institution Organized |
1 |
A modeling approach to the customer satisfaction level under demand uncertainty using Flexsim |
2008 |
TEAMTECH2008 |
IISc Bangalore |
2 | Influence of heat treatment on corrosion behavior of Co-Cr-Mo deposited with Laser Engineered Net Shaping. | 2016 | PM 16 | Powder Metallurgy Association of India |
3 | Influence of heat treatment on tensile properties of LENS deposited Co-Cr-Mo alloy | 2016 | AIMTDR 2016 | College of Engineering, Pune |
4 | Enhancing Productivity of a manufacturing industry through re-engineering | 2019 | ICREMMES | VRSEC, Vijayawada |
5 | Impact Strength and Fracture Analysis of Co-Cr-Mo Alloy Deposited with Laser Engineered Net Shaping - An Additive Manufacturing Technology | 2019 | World Congress on Engineering | Imperial College, London |
6 | Comparison of Properties of Laser Deposited Co-Cr-Mo and C-Cr-W alloys | 2019 | World Congress on Engineering | Imperial College, London |
7 |
Analysis of an Aluminium alloy coated with Co-Cr-Mo and Co-Cr-W by FTIR and XRD methods |
2021 | International Conference on Engineering Research and Technology Transfer | Bule Hora University, Ethiopia |
8 |
Functionally Graded Materials -Importance and
Applications- A Review
|
2021 |
International Conference on Innovations and Challenges in Mechanical Engineering
|
K L E F (Deemed to be University) |
9 | Effect of Build Orientation on Mechanical and Corrosion Properties of Inconel 718 Samples Using Powder Bed Fusion Technique | 2021 | 10th International Conference and Exhibition on Additive Manufacturing Technologies – AM 2021 | Additive Manufacturing Society of India, Bengaluru. |
10 | Design and Analysis of Economical Kit for Testing Purity of Honey | 2022 | ICSMS | VVIT, Guntur |
National Conferences
SNO |
Title |
Year |
Name of Proceedings |
Name of Institution Organized |
1 |
Simulation of services in supermarket using Flexsim |
2008 |
National Conference |
PVP Siddhartha Institute of Technology, Vijayawada |
2 | Applications and Performance of Nano Composites in the fireld of Mechanical Engineering - A Review | 2017 | National Conference on Recent Advances in Mechanical Engineering | PVP Siddhartha Institute of Technology, Vijayawada |
Book Chapters
Sl. No. | Title of the Chapter | Title of the Book | Publisher | Date of Publishing | ISBN |
1. | Presage of Tensile Strength and Impact resistance of heat treated and weld accrued Cobalt Chromium Molybdenum Alloy | Anual Technical Volume PRDB | Institution of Engineers (India) | 2020 | ISBN 978-81-952159-5-9 |
5. Membership in Professional Bodies
SNO |
Name of Professional Society |
Membership No |
Membership Info (Life/Fellow/Ordinary) |
1 |
Institution of Engineers (India) |
F-1272523 |
Fellow |
2 | Indian Society for Technical Education | LM 50647 | LIFE Member |
3 | Condition Monitoring Society of India | LM 0900122 | LIFE Member |
4 | Indian Institute of Production Engineers | S/LF/4537 | LIFE Member |
5 | Engineering Design and Analysis Forum | EDAF/2010/ED94 | LIFE Member |
6 | Powder Metallurgy Association of India | LM-00373 | LIFE Member |
7 | International Association of Engineers | 117229 | LIFE Member |
8 | Institute of Research Engineers and Doctors | SNM10100055531 | Senior Member |
9 | Additive Manufacturing Society of India | AM 245/16 | LIFE Member |
10 | Society of Mechanical and Automobile Engineers | LM 02053 | LIFE Member |
11 | International Association of Advanced Materials, Swedan | 748221912848 | Member |
12 | Society of Failure Analysis | FLM-SFA-0739 | Life Member |
13 | Indian Society for Advancement of Materials and Processing Engineering | L-1700 | Life Member |
14 | Indian Laser Association | LM 354 | Life Member |
15 | Solar Energy Society of India | LM/2681/2022 | Life Member |
6. Training/Conferences/Seminars/Summer School/Winter School attended
Ø 18-19th January 2007, National Conference on “Factory Automation, Robotics and Soft Computing” at National Institute of Technology, Warangal. |
Ø 26-28th July 2007, National Workshop on “Recent Advances in Fibre reinforced Composite Materials” at V. R. Siddhartha Engineering College, Vijayawada. (AICTE) |
Ø 25th September2007, National Workshop on “Application of Simulation in Manufacturing” at V. R. Siddhartha Engineering College, Vijayawada. |
Ø 25th August to 6th September 2008, Short term training programme on “Digital Factory” at National Institute of Technology, Warangal. (MHRD) |
Ø 21st March 2009, National Workshop on “Advanced Composites and Nano” at University College of Engineering, JNTU Kakinada. |
Ø 14th August 2009, National Workshop on “Advances in Manufacturing” at National Institute of Technology, Warangal. |
Ø 18th August 2009, Workshop on the “3D modeling & Design validation software, Solid works & Manufacturing solution, CAM works” at V R Siddhartha Engineering College, Vijayawada. |
Ø 4th & 5th December 2009, National Conference on Condition Monitoring (NCCM – 2009) at Visakhapatnam. |
Ø 5th & 6th March 2010, A National Workshop on Rapid Prototyping Technologies (RPT – 2010) at M.V.S.R. Engineering College, Nadergul, Hyderabad. |
Ø 8th & 9th October 2010, a Two-Day National Workshop on “Advanced Medical Applications Using MIMICS Software” at National Institute of Technology, Warangal |
Ø 5th & 6th November 2011, A Two day all India Workshop on “The Best International Practices in Production” at Institution of Engineers (India), Vijayawada Local Centre |
Ø 23rd to 27th January 2012, A Five day “Continuing Education Programme (CEP) on Rapid Prototyping” at National Institute of Technology, Warangal. |
Ø 16th & 17th March 2012, A DST Sponsored Two day seminar on “Integration of Reverse Engineering & Rapid Prototyping” at V R Siddhartha Engineering College, Vijayawada. |
Ø 4th to 9th June 2012, A One week Faculty Development Programme on “Communication and Presentation Skills” at JNTU Kakinada. |
Ø 25th June to 7th July 2012, An AICTE sponsored two week Faculty Development program on “Machine Condition monitoring and Fault Diagnostics” at V R Siddhartha Engineering College, Vijayawada. |
Ø 3rd August 2012, A One day workshop on “Advances in Manufacturing Systems” at Daita Madhusudana Sastry Sri Venkateswara Hindu College of Engineering, Machilipatnam. |
Ø 22nd September 2012, a One day National workshop on “Virtual labs in Mechanical Engineering” at V R Siddhartha Engineering College, Vijayawada |
Ø 24th & 25th September 2012, a Two day National level Faculty Development programme on “Product Lifecycle Management (PLM) under TEQIP at Shri Vishnu Engineering College for Women, Bhimavaram |
Ø 28th April 2013, a one day national conference on Latest Innovations in Mechanical Engineering (LIME - 2013) at Andhra University College of Engineering, Visakhapatnam. |
Ø 29th & 30th April 2013, a two day national workshop on Recent Advances in Welding Metals (RAWM - 2013) at Andhra University College of Engineering, Visakhapatnam. |
Ø 30th May 2013, a one day national workshop on New Paradigms in Manufacturing at National Institute of Technology, Warangal. |
Ø 30th August 2013, NRB Research Dissemination Workshop on Titanium Matrix Composites at Indian Institute of Technology, Chennai. |
Ø 13th & 14th December 2013, a two day National Seminar on Manufacturing Automation Present and Future at Anil Neerukonda Institute of Technology and Sciences, Visakhapatnam. |
Ø 29 – 31 January 2014, a Three day workshop on Creative Design and Rapid Product Development Technologies at National Institute of Technology, Warangal. |
Ø 18th October 2014, A one day Faculty Development Programme on Recent Advances in Additive Manufacturing at V R Siddhartha Engineering College, Vijayawada. |
Ø 1st May, 2015, A one day workshop on “Intelligent Manufacturing” at V R Siddhartha Engineering College, Vijayawada. |
Ø 5th – 9th May, 2015, A One Week Short Term Training Program on 3D Printing Experience at National Institute of Technology, Warangal. |
Ø 11th and 12th December 2015, A two day National Seminar on Advances in Metal Matrix Nano Composites (UGC Sponsored) at University Engineering College, Acharya Nagarjuna University, Guntur. |
Ø 20th April to 28th May, 2016, a Six week “Faculty Industry Training Program” on “design and 3D Printing of Housing for LED Corridor Lamp” at M/s. Efftronics Systems Pvt. Ltd., Vijayawada. |
Ø 6th June 2016, A One day workshop on “World Environment day” at Institution of Engineers India Vijayawada Local Centre. |
Ø 20th to 24th June 2016, One week GIAN Course on 3D Printing and Additive Manufacturing” (Course code: 151036L03) National Institute of Technology, Warangal. |
Ø 29th to 30th September 2016, a two day national Seminar on “March to Make in India through Engineering Advancements” at RVR&JC college of Engineering, Guntur. |
Ø 10th to 11th November 2016, a two day Faculty Development Program on “Powder metallurgy & Particulate Materials – Fundamentals and Industrial applications” at PVPSIT, Vijayawada. |
Ø 5th to 10th June 2017, A One week Faculty Development Program on “3D Printing in Engineering Education” at NIT Warangal under PMMMNMTT |
Ø 5th to 10th March, 2018, A short term course on “Ultra Precision Machine Tools – Design and Characterization” at IITMadras. |
Ø 21st and 22nd March 2018, Indo-Australian Workshop on “Advances in Materials and Additive Manufacturing (AM)2” at IITMadras in association with Deakin University, Australia. |
Ø 18th and 19th May 2018, National Workshop on “Advances in Automotive Electronics” at SRM University, Chennai |
Ø 11th August 2018, One day workshop on "Characterization of Metal Matrix Composites" organized by Institution of Engineers (India) - A.P. State Centre at Gudlavalleru Engineering College. |
Ø 31st August and 1st September, 2018 A two day National level seminar on 3D Printing Technology - Innovations in clinical Biomedical Field at G.N.I.T. Hyderabad |
Ø 23rd to 27th October, 2018 A Five day Faculty Development Program on "Product Development on 3D Experience" APSSDC, Dassault Systemes |
Ø 5th to 9th October, 2019, One week Faculty Development Program on “Product Re-engineering and 3D Printing” conducted by Gayatri Vidya Parishad College of Engineering, Visakhapatnam, in association with APSSDC. |
Ø 18th to 24th April, 2020, Online Faculty Development Program on “Practical Aspects of Finite Analysis using ABAQUS” organized by APSSDC in association with Dassault Systemes |
Ø 26th April, 2020, Webinar on “Employability skills in curriculum deign” conducted by Audisankara College of Engineering & Technology, in association with PES University, Bengaluru. |
Ø 30th April to 2nd May, 2020, Online Faculty Development Program on “Automotive Structure Design using CATIA” organized by APSSDC in association with Dassault Systemes |
Ø 16th May, 2020, Webinar on “VRF System basics” conducted by Indian Society of Heating, Refrigerating and Air Conditioning Engineers. |
Ø 21st to 23rd May, 2020, Online Faculty Development Program on “Design for Manufacturing and Assembly (DFMA)” organized by APSSDC in association with Dassault Systemes |
Ø 23rd to 28th May, 2020 Online AICTE Recognized Faculty Development Programme on “Recent Advances in Material Characterization” organized by National Institute of Technical Teachers Training & Research, Chandigarh. |
Ø 29th May, 2020, Webinar on “Insights to Industry 4.0” Organized by S.A. Engineering College, Chennai |
Ø 1st to 5th June, 2020,Online Faculty Development Program on “Digital Engineering in Aerospace” organized by APSSDC in association with Dassault Systemes |
Ø 8th to 12th June, 2020,Online Faculty Development Program on “Automotive Interior Design” organized by APSSDC in association with Dassault Systemes |
Ø 4th July, 2020, Webinar on “Automotive Welding and Metallurgy” organized by Visakha Institute of Engineering and Technology, Visakhapatnam |
Ø 6th to 10th July, 2020 Online AICTE Recognized Faculty Development Programme on “Materials Processing and Optimization” organized by National Institute of Technical Teachers Training & Research, Chandigarh. |
Ø 13th to 18th July, 2020, Six day Online Faculty Development program on “Teaching and learning of Additive Manufacturing Technology: Emphasis on Metal 3D Printing” Organized by TLC of National Institute of Technology, Warangal |
Ø 19th to 24th July 2020, One Week International Faculty Development Program – Online on "Role of Materials and Processing in Additive Manufacturing: 3D Printing to Industry-2020", organized by GLA University, Mathura in association with Indian Institute of Metals (IIM), Mathura Chapter. |
Ø 20th to 24th July, 2020, Online Faculty Development Program on “CATIA V5 Chassis Design” organized by APSSDC in association with Dassault Systemes |
Ø 9th August 2020, One day National Webinar on “The Scope of 3D Printing as a Startup in India” organized by College of Engineering, Banswara, Rajastan |
Ø 25th and 26th August, 2020, Two Day National Level Online Chemistry Webinar entitled “Polymer Materials-Biomedical Applications” organized by Balaji Institute of Technology & Science, Narsampet, Warangal Rural, Telangana, India. |
Ø 10th to 14th May, 2021, Online Faculty Development Program on “Vehicle Dynamic Setup using MBD” organized by APSSDC in association with Dassault Systemes |
Ø 18th and 19th June, 2021 workshop on “Model Based Systems Engineering (Regional Research Symposium on Problem Based Learning)” organized by IUCEE |
Ø 28th June to 3rd July, 2021 Online AICTE sponsored QIP Short Term Course on “4D Printing on Smart Manufacturing” organized by National Institute of Technical Teachers Training & Research, Chandigarh. |
Ø 23rd July 2021, One Day Webinar on "Artifact Innovation and Development using Additive Manufacturing and IoT" organized by Manipal Institute of Technology, Manipal |
Ø 18th to 21st August, 2021, Virtual Workshop on Additive Manufacturing Organized by ATAL Incubation Center – Pondicherry Engineering College Foundation |
Ø 25th to 30th October, 2021, One-week Online STTP on "3D Printing for Sustainable Development" jointly organized by AICTE, New Delhi and Human Resource Development Centre, Jawaharlal Nehru Technological University, Hyderabad |
Ø 24th to 29th May, 2022, Online Faculty Development Program on “Simulation for Life Sciences” organized by APSSDC in association with Dassault Systemes |
7. Training/Conferences/Seminar/Summer School/Winter School Conducted
Sl. No. |
Year |
Title |
Duration |
Sponsoring Agencies |
1 |
2010 |
Convener, Horizon2K10, a national level technical symposium organized by the Department of Mechanical engineering, Guntur Engineering College, Guntur. | 1 Day | GEC |
2 |
2011 |
Convener, DESPROTH ’11, A National level students Technical Symposium on “Recent Advances in Mechanical Engineering” at Department of Mechanical Engineering, Guntur Engineering College, Guntur. |
1 Day |
GEC |
3 | 2017 | A One day workshop on 3D Printing (for Students) on 23rd February, 2017. | 1 Day | VVIT |
4 | 2017 | A Two day workshop on 3D Printing and Reverse Egineering (for Faculty) from 27th to 28th April, 2017. | 2 Days | VVIT |
5 | 2017 | Coordinator, One day workshop on Value Engineering in association with INVEST-SZC | 1 Day | VVIT |
6 | 2018 | Coconvener, A Three day Faculty Development Program on "Product Development on 3D Experience" from 20th to 23rd November, 2018 | 3Days | VVIT |
7 | 2019 | CoConvener, A Two day Faculty Devlopment Program on "Product Re-Engineering" from 6th to 7th, May, 2019, organized by APSSDC in association with M/s. Dassault Systemes | 2 Days | VVIT |
8 | 2019 | Coordinator, One day Seminar on Value Engineering in association with INVEST-SZC | 1 Day | VVIT |
9 | 2020 | A one week faculty development program on "Advances and Recent Trends in Additive Manufacturing" (ARTAM) sponsored by ATAL - AICTE from 21st to 25th September, 2020 | One Week | VVIT |
Guest Lectures Delivered
Sl. No. | Program | Organized by | Dates |
1 | Two day Faculty Development Programme on “Applications of Manufacturing Technologies for Make in India” |
Pragati Engineering College, Kakinada | 2nd January 2016 |
2 | Faculty Development Programme on “Rapid Prototyping” |
PBR Visvodaya Institute of Technology and Science, Kavali | 8th June 2016 |
3 | Five day Faculty Development Program on "Recent Trends in Manufacturing Engineering" | Narayana Engineering College, Gudur | 26th December, 2017 |
4 | 3rd and 4th Year students of Mechanical Engineering Department | Aditya College of Engineering & Technology, Kakinada | 10th January, 2019 |
5 | One Day Workshop on "Additive Manufacturing" | Narayana Engineering College, Gudur | 26th September, 2019 |
6 | A ONE WEEK Faculty Development Program on "Product Re-Engineering" |
APSSDC, Dassault Systemes
Gayatri Vidya Parishad College of Engineering, Visakhapatnam
|
5th to 9th October, 2019 |
7 | A Two week Faculty Development Program on "Emerging Technologies and Challenges in Mechanical Engineering" |
RVR&JCCE
AICTE
|
21st October to 2nd November, 2019 |
8 | One week Faculty Development Program titled “Recent Advances in 3D Printing Technologies | Dhanekula Institute of Engineering and Technology | 4th to 8th June, 2020 |
9 | One week Faculty Development Program titled “Contemporary Developments in Manufacturing Processes Sustainable Manufacturing and Industrial Technologies | Pragati Engineering College, Kakinada | 9th to 13th June, 2020 |
10 | Webinar on Fundamentals of Additive Manufacturing | Pragati Engineering College, Kakinada | 26th October 2022 |
Projects Guided
Sl. No. | Program | Name of the student | Institution | Degree Status |
1 | M. Tech. | Mrs. M L Vinitha | Nimra College of Engineering, Vijayawada | Awarded 2012 |
2 | M. Tech. | Mr. Nagabhushanam | V V I T, Guntur | Awarded 2018 |
3 | Ph.D. | Mr. Ganzi Suresh | K L E F (Deemed University), Guntur | Awarded 2019 |
4 | Ph.D. | Mr. Y. Pratapa Reddy | K L E F (Deemed University), Guntur | Running |
5 | M. Tech. | Mr. Sk. Jhony Basha | V V I T, Guntur | Awarded 2019 |
6 | Ph.D. | Mr. D. V. Seshagiri Rao | Annamalai University, Chidambaram, Tamilnadu | Running |
7 | Ph.D. | Ms. K. Jyothi Padmaja | K L E F (Deemed University), Guntur | Running |
8 | M. Tech. | Mr. B. Sivaramakrishna Reddy | V V I T, Guntur | Awarded 2022 |
Patents
Sl. No. | Reference | Title of the patent | Type of Patent | Date | Status |
1 | Grant No. 99891, Application No. 334865-001 | Bellow Air Pump | Design | 14-07-2021 | AWARDED |
2 | Grant No. 102974, Application No. 335497-001 |
Height Adjustble Table | Design | 01-10-2021 | AWARDED |
3 | Grant No. 104716, Application No. 334866-001 |
Adjustable size book stand | Design | 12-11-2021 | AWARDED |
4 | Grant No. 109653, Application No. 356218-001 | Pot Moulding Machine | Design | 02-03-2022 | AWARDED |
5 | Grant No. 109758, Application No. 356219-001 | Cup Holder | Design | 03-03-2022 | AWARDED |
6 | Grant No. 112894, Application No. 335498-001 | Adjustable curved wedge cam | Design | 02-05-2022 | AWARDED |
7 | Grant No. Application No. 351092-001 |
Multipurpose Roller Cutter | Design | .3/12/2021 | AWARDED |
8 | Grant No. Application No. 351094-001 | Multipurpose Roller Cutter | Design | 03/12/2021 | AWARDED |
9 | Grant No.125847 Application No. 373885-001 | Double serrated blade scissors | Design | 19/01/2023 | AWARDED |
10 | Grant No.127471 Application No. 375287-001 | Bottle CapOpener | Design | 25/01/2023 | AWARDED |
11 | Grant No.129935 Application No. 373886-001 | Single serrated blade scissors | Design | 28/02/2023 | AWARDED |
12 | Grant No.131267 Application No. 365263-001 | Drilling Dust collector | Design | 17/03/2023 | AWARDED |
13 | Grant No. 134551 Application No. 376973-001 | Rawa Filter | Design | 08/05/2023 | AWARDED |
Distinctions
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Online courses completed
Sl. No. | Title | Organized by | Year | Performance |
1 | Product Design and Development | NPTEL | 2017 | Elite |
2 | Manufacturing of Composites | NPTEL | 2017 | Elite |
3 | Metal Cutting and Machine Tools | NPTEL | 2018 | Elite |
4 | Basic Spoken Sanskrit | NPTEL | 2018 | Elite |
5 | Rapid Manufacturing | NPTEL | 2019 | Elite |
6 | Product Development using Value Engineering | NPTEL | 2019 | Elite + Silver |
7 | Intermediate level of Spoken Sanskrit | NPTEL | 2019 | Elite + Silver |
8 | Automation in Manufacturing | NPTEL | 2020 | Elite + Silver |
9 | Manufacturing Systems Technology I & II | NPTEL | 2020 | Elite + Silver |
10 | 3D Printing Revolution | Coursera | 2020 | -- |
11 | Materials Science: 10 Things Every Engineer Should Know | Coursera | 2020 | -- |
12 | 3D Printing Software | Coursera | 2020 | -- |
13 | 3D Printing Hardware | Coursera | 2020 | -- |
14 | Enhancing Clean, Green, and Smart Learning Spaces in & around the Campus | IUCEE & Canvas | 2021 | -- |
15 | Mechanics of Machining | NPTEL | 2021 | Elite |
16 | Manufacturing Process Technology I & II | NPTEL | 2021 | Elite |
17 | Advanced level of Spoken Sanskrit | NPTEL | 2022 | Elite + Silver |
18 | Engineering Design for Circular Economy | IUCEE & EDX | 2022 | -- |
19 | Fundamentals of Additive Manufacturing | NPTEL | 2022 | Elite + Silver, Top 5% in the country |
20 | Metal Additive Manufacturing | NPTEL | 2022 | Elite + Silver |
21 | Electric Vehicle 1 | NPTEL | 2023 | Elie + Silver |
22 | Entrepreneurship Essentials | NPTEL | 2023 | ELITE |