1. Personal Information
|
Name |
Dr. Mantrala Kedar Mallik |
|
Designation |
Professor |
|
Qualification |
A.M.I.E., M. Tech., Ph.D. |
|
Department |
Mechanical Engineering |
|
|
This email address is being protected from spambots. You need JavaScript enabled to view it. This email address is being protected from spambots. You need JavaScript enabled to view it. |
|
Phone Number |
+91 92464 00126 +91 98487 30622 |
| Google Scholar Link | https://scholar.google.com/citations?hl=en&user=FF7xSp0AAAAJ |
| ORCId. | 0000-0002-7543-9742 |
2. Academic Information
|
Name of the Degree |
Name of the College |
Name of the University |
Year of Passing |
Specialization |
|
Ph.D. |
Andhra University College of Engineering (Autonomous), Visakhapatnam. | Andhra University | 2015 | Material Characterization, Metal 3D Printing |
| M.Tech. | V R Siddhartha Engineering College, Vijayawada | Acharya Nagarjuna University | 2008 | Production Engineering |
| A.M.I.E. | Institution of Engineers (India), Kolkata | Institution of Engineers (India), Kolkata | 2005 | Mechanical Engineering |
| Diploma | VKR & VNB Polytechnic, Gudivada | SBTET, A.P. | 1994 | Automobile Engineering |
3. Experience (Teaching/Industry/R&D)
|
SNO |
Period |
Designation |
Name of Organization |
Experience |
|
|
From |
To |
||||
|
1 |
September, 1994 |
August,1999 | Clerk | Madras Auto Service, Hyderabad | 5 Years |
|
2 |
September, 1999 |
June, 2005 |
Proprietor |
Sree Service Syndicate, Vijayawada |
6 Years |
| 3 | July, 2005 | February, 2006 | Associate Lecturer | VKR & VNB Polytechnic, Gudivada | 1 Year |
| 4 | February, 2006 | May, 2008 | Lecturer | K L College of Engineering, Vaddeswaram | 2 Years |
| 5 | May, 2008 | February, 2012 | Assistant Professor | Guntur Engineering College, Guntur | 4 Years |
| 6 | March, 2012 | June, 2015 | Assistant Professor | V V I T | 3 Years |
| 7 | July, 2015 | June, 2021 | Associate Professor | V V I T | 6 Years |
| 8 | July, 2021 | Till Date | Professor | V V I T | |
4. Publications
International Journals
|
SNO |
Title |
Year |
Name of Journal |
Issue No |
Vol No |
Page No |
ISSN NO |
|
1 |
Characterization of materials used in Laser Engineered Net Shaping through microstructure analysis – a review |
2014 |
Trends in Machine Design (STM) |
1 |
1 |
5-8 |
2455-3352 |
| 2 | Laser deposited Co-Cr-Mo alloy, microstructure, wear and electrochemical properties, | 2014 | Journal of material research (Material research society) Scopus, SCIE, SJRQ1 | 17 | 29 | 2021-2027 | 0884-2914 |
| 3 | Additive Manufacturing of Co-Cr-Mo alloy influence of heat treatment on microstructure, tribological and electrochemical properties | 2015 | Computer aided and digital manufacturing technologies (Frontiers in mechanical engineering) | 2 | 1 | -- | 2297-3079 |
| 4 | Microstructure and tribological properties of weld deposited Co-Cr-Mo alloy | 2015 | Journal of Manufacturing Science and Production (De Gruyter) | 2 | 15 | 239-241 | 2191-0375 |
| 5 | Effect of Burnishing on the Surface Quality and Hardness of ABS Plastic Samples Fabricated with Fused Deposition Modeling | 2015 | Journal of Production Research & Management, | 1 | 5 | 8-13 | 2347-9930 |
| 6 | Effect of heat treatment on hardness and wear behavior of weld deposited Co-Cr-Mo alloy | 2015 |
Revista Materia Scopus, SJR Q3 |
2 | 20 | 544-549 | 1517-7076 |
| 7 | Application Oriented Approach of Layered Manufacturing in Biomedical and Engineering Fields: A Review | 2015 | Journal of Materials and Metallurgical Engineering | 2 | 5 | 39-51 | 2321-4236 |
| 8 | Prediction of durability of human hip joint implants by MATLAB | 2017 | Research & Reviews: A Journal of Life Sciences | 7 | 2 | 1-8 | 2348-9545 |
| 9 | Laser Engineered Net Shaping process in development of bio-compatible implants: An overview | 2017 | Journal of Advanced Research in Dynamical and Control System Scopus Indexed | 9 | Sp. 14 | 745-755 | 1943-023X |
| 10 | A Review on Development of Medical Implants by Rapid PrototypingTechnology |
2017 |
International Journal of Pure and Applied Mathematics |
21 | 117 | 257-276 | 1314-3395 |
| 11 | Electro Chemical Behaviour of LENSTM Deposited Co-Cr-W Alloy for Bio-Medical Applications | 2018 | International Journal of Mechanical and Production Engineering Research and Development - Scopus Indexed | Special Issue, | 41-52 | 2249-8001 | |
| 12 | Processing & Characterization of LENSTM Deposited Co-Cr-W Alloy for Bio-Medical Applications | 2018 | International Journal of Pharmaceutical Research - Scopus Indexed | 1 | 10 | 276-285 | 0975-2366 |
| 13 | Bio-Compatible Processing of LENSTM Deposited Co-Cr-W alloy for Medical Applications | 2018 | International Journal of Engineering & Technology | 7 | 2.20 | 362-366 | 2227-524X |
| 14 | Effect of Process Parameters on the Tensile Properties of LENS deposited Co-Cr-Mo alloy | 2018 | International Journal of Manufacturing Technology and Management - Scopus Indexed & SJR Q3 |
6 | 32 | 509-516 | 1741-5195 |
| 15 | Analysis and Optimization of Single Cylinder IC Engine Connecting Rod | 2018 | Journal of Catalyst and Catalysis (STM) | 2 | 5 | 26-33 | 2349-4344 |
| 16 | Hardness, Wear and Corrosion Properties of Co-Cr-W Alloy Deposited with Laser Engineered Net Shaping in Medical Applications | 2019 | International Journal of Innovative Technology and Exploring Engineering - Scopus Indexed | 8 | 8 | 2951-2955 | 2278-3075 |
| 17 | Electro Chemical Behavior of Different Metals in Sodium Chloride Solution | 2019 | International Journal of Emerging Trends in Engineering Research - Scopus Indexed | 7 | 11 | 715-719 | 2347-3983 |
| 18 | Diverse Electro-Chemical Techniques and Applications of Aluminium with 3.5 percent Sodium Chloride Solution | 2020 |
Solid State Technology SJR Q4
|
63 | 5 | 3901-3910 | 0038-111X |
| 19 | Corrosion Behavior of LENS Deposited CoCrMo Alloy Using Bayesian Regularization‑Based Artificial Neural Network (BRANN) | 2021 | Journal of Bio and Tribo corrosion Springer link, SJR Q2 |
3 | 7 | Article No. 116 | 2198 - 4220 |
| 20 | Characterization of Tribological and Mechanical Properties of SS304 coated with Co-Cr-Mo alloy with 5% HCl solution | 2022 | ARPN Journal of Engineering and Applied Science, Scopus, SJR Q3 | 19 | 16 | 1973 - 1977 | 1819 - 6608 |
| 21 | Prophecy of wear rate and microhardness of commercial materials by experimentation and artificial neural networks | 2022 | Journal of Engineering Science and Technology, Web of Sciences Indexed, SJR Q3 | 5 | 17 | 3600 - 3618 | 1823 - 4690 |
| 22 | Hybrid swarm based intelligent algorithm for lattice structure optimization in additive manufacturing system | 2022 | International journal of Interactive design and manufacturing, Springer, Web of Sciences Indexed, SJR Q2 | Published on 28/03/2022 | 1955 - 2505 | ||
| 23 | Experimental evaluation of additively deposited functionally graded material samples-microscopic and spectroscopic analysis of SS-316L/Co-Cr-Mo alloy | 2022 | AIMS Materials Science, Web of Sciences Indexed, SJR Q2 | 4 | 9 | 653-667 | 2372-0484 |
| 24 | Tensile, hardness and metallurgical analysis of laser cured Co-Cr-Mo alloy samples | 2022 | Advances in Materials and Processing Technologies (T&F), Web of Sciences Indexed, SJR Q2 | Published on 09/09/2022 | 2374-0698 | ||
| 25 | Investigation of Impact Strength, Micro Hardness and Metallurgical Analysis of DMLS Fabricated CoCrMo Alloy Samples | 2022 | Lasers in Manufacturing and Materials Processing, Springer, Scopus, SJR Q2 | Published on 01/11/2022 | 2196-7229 | ||
| 26 | Evaluation of Compression, Wear and Electrochemical Behavior of CoCrMo Alloy Samples Fabricated with Direct Metal Laser Sintering | 2022 | Journal of Material Engineering and Performance, Springer, SCIE Indexed, SJR Q2 | Published on 28/11/2022 | 1059-9495 | ||
ConferencePapers Published in Journals
| Sl. No. | Title of the Paper | Year | Name of the Journal | Issue No. | Vol. No. | Page No. | ISSN |
| 1 | Optimization of speed parameters in Burnishing of samples fabricated by Fused Deposition Modeling | International Journal of Mechanical and Industrial Engineering (IJMIE) | 2 | 2 | 10-12 | 2231 –6477 | |
| International Conference on Mechanical & Industrial Engineering | 2012 | IRNet, Guntur | |||||
| 2 | Effect of heat treatment on hardness of Co-Cr-Mo alloy deposited with Laser Engineered Net Shaping | Procedia engineering (Elsevier) Scopus indexed | 97 | 1718-1723 | 1877-7058 | ||
| GCMM2014 | 2014 | VIT Vellore | |||||
| 3 | Effect of Heat treatment on Corrosion Behavior of Weld deposited Co-Cr-Mo Alloy | ARPN Journal of Engineering and Applied Sciences Scopus, SJR Q3 | 20 | 11 | 12188-12191 | 1819-6608 | |
| ICPER 2016 | 2016 | Universiti Technologi Petronos, Malaysia | |||||
| 4 | Application of modularity in a piston pump assembly line of a hydraulic system | ARPN Journal of Engineering and Applied Sciences Scopus, SJR Q3 | 20 | 11 | 12202-12205 | 1819-6608 | |
| ICPER 2016 | 2016 | Universiti Technologi Petronos, Malaysia | |||||
| 5 | Characterization and Wear Properties of Co-Cr-W alloy Deposited with Laser Engineered Net Shaping | International Journal of Recent Technology and Engineering (IJRTE) - Scopus Indexed | 4 | 7 | 151-155 | 2277-3878, | |
| ICRACMEP | 2018 | VVIT | |||||
| 6 | Prediction of Corrosion Properties of LENSTM Deposited Cobalt, Chromium and Molybdenum Alloy Using Artificial Neural Networks | International Journal of Materials and Product Technology (Inderscience) SCIE Indexed, SJR Q3 | 1/2/3 | 62 | 4-15 | 0268-1900 | |
| ICPCM | 2019 | National Institute of Technology, Rourkela | |||||
| 7 | Prediction about th influence of Nano Graphene particles on Tribological properties of Steel under dry and wet conditions | AIP Conference Proceedings, Scopus, Web of Sciences Indexed | 2327 | 20007 | 0094 243X | ||
| ICMSS | 2020 | Surya Engineering College, Erode | |||||
| 8 | Prediction of influence of Co-Cr-Mo alloy coating on the wear rate of Aluminium with HCl solution | Materials Today Proceedings, Scopus, Web of Sciences Indexed | Part 2 | 42 | 1287 - 1296 | 2214-7853 | |
| ICRAMM | 2020 | Velalar Institute of Technology, Erode | |||||
| 9 | Applications of Direct Mtal Laser Sintering Process in Engineering and Medical Fields - A Review | YMER - An INternational Journal | 10 | 21 | 1229 - 1237 | 0044-0477 | |
| NCAMMME | 2020 | Vignan university, Guntur | |||||
| 10 | Investigation of Electro-chemical performance of AZ31 Magnesium alloy – CaSiO3 Metal Matrix Composites in different environments | IOP Conference series - Materials Science and Engineering, Web of Sciences Indexed | 1112 | 12002 | 1757 - 899X | ||
| ICI4TCME | 2021 | V.V.I.T., Guntur | |||||
| 11 | Comparison of Effect of Orientation on SS304 and SS316 Material Samples Fabricated with DMLS Technology | IOP Conference series - Materials Science and Engineering, Web of Sciences Indexed | 1112 | 12014 | 1757 - 899X | ||
| ICI4TCME | 2021 | V.V.I.T., Guntur | |||||
| 12 | Ex Situ Tribological and Electro-chemical Analysis of Aluminium | IOP Conference series - Journal of Physics: Web of Sciences Indexed | 2070 | 12205 | 1742 - 6596 | ||
| ICAPSM 2021 | 2021 | SNS College of Technology, Coimbatore |
International Conferences
|
SNO |
Title |
Year |
Name of Proceedings |
Name of Institution Organized |
|
1 |
A modeling approach to the customer satisfaction level under demand uncertainty using Flexsim |
2008 |
TEAMTECH2008 |
IISc Bangalore |
| 2 | Influence of heat treatment on corrosion behavior of Co-Cr-Mo deposited with Laser Engineered Net Shaping. | 2016 | PM 16 | Powder Metallurgy Association of India |
| 3 | Influence of heat treatment on tensile properties of LENS deposited Co-Cr-Mo alloy | 2016 | AIMTDR 2016 | College of Engineering, Pune |
| 4 | Enhancing Productivity of a manufacturing industry through re-engineering | 2019 | ICREMMES | VRSEC, Vijayawada |
| 5 | Impact Strength and Fracture Analysis of Co-Cr-Mo Alloy Deposited with Laser Engineered Net Shaping - An Additive Manufacturing Technology | 2019 | World Congress on Engineering | Imperial College, London |
| 6 | Comparison of Properties of Laser Deposited Co-Cr-Mo and C-Cr-W alloys | 2019 | World Congress on Engineering | Imperial College, London |
| 7 |
Analysis of an Aluminium alloy coated with Co-Cr-Mo and Co-Cr-W by FTIR and XRD methods |
2021 | International Conference on Engineering Research and Technology Transfer | Bule Hora University, Ethiopia |
| 8 |
Functionally Graded Materials -Importance and
Applications- A Review
|
2021 |
International Conference on Innovations and Challenges in Mechanical Engineering
|
K L E F (Deemed to be University) |
| 9 | Effect of Build Orientation on Mechanical and Corrosion Properties of Inconel 718 Samples Using Powder Bed Fusion Technique | 2021 | 10th International Conference and Exhibition on Additive Manufacturing Technologies – AM 2021 | Additive Manufacturing Society of India, Bengaluru. |
| 10 | Investigation of Metallurgical and Mechanical Properties of DMLS Fabricated Inconel 718 | 2022 | ICSMS | VVIT, Guntur |
| 11 | Design and Analysis of Economical Kit for Testing Purity of Honey | 2022 | ICSMS | VVIT, Guntur |
National Conferences
|
SNO |
Title |
Year |
Name of Proceedings |
Name of Institution Organized |
|
1 |
Simulation of services in supermarket using Flexsim |
2008 |
National Conference |
PVP Siddhartha Institute of Technology, Vijayawada |
| 2 | Applications and Performance of Nano Composites in the fireld of Mechanical Engineering - A Review | 2017 | National Conference on Recent Advances in Mechanical Engineering | PVP Siddhartha Institute of Technology, Vijayawada |
Book Chapters
| Sl. No. | Title of the Chapter | Title of the Book | Publisher | Date of Publishing | ISBN |
| 1. | Presage of Tensile Strength and Impact resistance of heat treated and weld accrued Cobalt Chromium Molybdenum Alloy | Anual Technical Volume PRDB | Institution of Engineers (India) | 2020 | ISBN 978-81-952159-5-9 |
5. Membership in Professional Bodies
|
SNO |
Name of Professional Society |
Membership No |
Membership Info (Life/Fellow/Ordinary) |
|
1 |
Institution of Engineers (India) |
F-1272523 |
Fellow |
| 2 | Indian Society for Technical Education | LM 50647 | LIFE Member |
| 3 | Condition Monitoring Society of India | LM 0900122 | LIFE Member |
| 4 | Indian Institute of Production Engineers | S/LF/4537 | LIFE Member |
| 5 | Engineering Design and Analysis Forum | EDAF/2010/ED94 | LIFE Member |
| 6 | Powder Metallurgy Association of India | LM-00373 | LIFE Member |
| 7 | International Association of Engineers | 117229 | LIFE Member |
| 8 | Institute of Research Engineers and Doctors | SNM10100055531 | Senior Member |
| 9 | Additive Manufacturing Society of India | AM 245/16 | LIFE Member |
| 10 | Society of Mechanical and Automobile Engineers | LM 02053 | LIFE Member |
| 11 | International Association of Advanced Materials, Swedan | 748221912848 | Member |
| 12 | Society of Failure Analysis | FLM-SFA-0739 | Life Member |
| 13 | Indian Society for Advancement of Materials and Processing Engineering | L-1700 | Life Member |
| 14 | Indian Laser Association | Life Member |
6. Training/Conferences/Seminars/Summer School/Winter School attended
|
SNO |
Year |
Title |
Conducted At |
|
1 |
18-19th January 2007 |
National Conference on “Factory Automation, Robotics and Soft Computing |
National Institute of Technology, Warangal. |
|
2 |
26-28th July 2007 |
National Workshop on”Recent Advances in Fibre reinforced Composite Materials” |
V. R. Siddhartha Engineering College, Vijayawada. (AICTE) |
| 3 | 25th September2007 | National Workshop on “Application of Simulation in Manufacturing” | V. R. Siddhartha Engineering College, Vijayawada. |
| 4 | 25th August to 6th September 2008 | Short term training programme on “Digital Factory” | National Institute of Technology, Warangal. (MHRD) |
| 5 | 21st March 2009 | National Workshop on “Advanced Composites and Nano” | University College of Engineering, JNTU Kakinada. |
| 6 | 14th August 2009 | National Workshop on “Advances in Manufacturing” | National Institute of Technology, Warangal. |
| 7 | 18th August 2009 | Workshop on the “3D modeling & Design validation software, Solid works & Manufacturing solution, CAM works” | V R Siddhartha Engineering College, Vijayawada. |
| 8 | 4th & 5th December 2009 | National Conference on Condition Monitoring (NCCM – 2009) | CMSI, Visakhapatnam. |
| 9 | 5th & 6th March 2010 | A National Workshop on Rapid Prototyping Technologies (RPT – 2010) | M.V.S.R. Engineering College, Nadergul, Hyderabad. |
| 10 | 8th & 9th October 2010 | Two-Day National Workshop on “Advanced Medical Applications Using MIMICS Software” | National Institute of Technology, Warangal |
| 11 | 5th & 6th November 2011 | A Two day all India Workshop on “The Best International Practices in Production” | Institution of Engineers (India), Vijayawada Local Centre |
| 12 | 23rd to 27th January 2012 | Five day “Continuing Education Programme (CEP) on Rapid Prototyping” | National Institute of Technology, Warangal. |
| 13 | 16th & 17th March 2012 | A DST Sponsored Two day seminar on “Integration of Reverse Engineering & Rapid Prototyping” | V R Siddhartha Engineering College, Vijayawada. |
| 14 | 4th to 9th June 2012 | A One week Faculty Development Programme on “Communication and Presentation Skills” | JNTU Kakinada. |
| 15 | 25th June to 7th July 2012 | An AICTE sponsored two week Faculty Development program on “Machine Condition monitoring and Fault Diagnostics” | V R Siddhartha Engineering College, Vijayawada. |
| 16 | 3rd August 2012 | A One day workshop on “Advances in Manufacturing Systems” | Daita Madhusudana Sastry Sri Venkateswara Hindu College of Engineering, Machilipatnam. |
| 17 | 22nd September 2012 | One day National workshop on “Virtual labs in Mechanical Engineering” | V R Siddhartha Engineering College, Vijayawada |
| 18 | 24th & 25th September 2012 | Two day National level Faculty Development programme on “Product Lifecycle Management (PLM)" under TEQIP | Shri Vishnu Engineering College for Women, Bhimavaram |
| 19 | 28th April 2013 | One day national conference on "Latest Innovations in Mechanical Engineering (LIME - 2013)" | Andhra University College of Engineering, Visakhapatnam. |
| 20 | 29th & 30th April 2013 | Two day national workshop on "Recent Advances in Welding Metals (RAWM - 2013)" | Andhra University College of Engineering, Visakhapatnam. |
| 21 | 30th May 2013 | One day national workshop on "New Paradigms in Manufacturing" | National Institute of Technology, Warangal. |
| 22 | 30th August 2013 | NRB Research Dissemination Workshop on "Titanium Matrix Composites" | Indian Institute of Technology, Chennai. |
| 23 | 13th & 14th December 2013 | Two day National Seminar on "Manufacturing Automation Present and Future" | Anil Neerukonda Institute of Technology and Sciences, Visakhapatnam. |
| 24 | 29 – 31 January 2014 | Three day workshop on "Creative Design and Rapid Product Development Technologies" | National Institute of Technology, Warangal. |
| 25 | 18th October 2014 | A one day Faculty Development Programme on "Recent Advances in Additive Manufacturing" | V R Siddhartha Engineering College, Vijayawada. |
| 26 | 1st May, 2015 | A one day workshop on “Intelligent Manufacturing" | V R Siddhartha Engineering College, Vijayawada. |
| 27 | 5th – 9th May, 2015 | A One Week Short Term Training Program on "3D Printing Experience" | National Institute of Technology, Warangal. |
| 28 | 11th and 12th December 2015 | A two day National Seminar on "Advances in Metal Matrix Nano Composites" (UGC Sponsored) | University Engineering College, Acharya Nagarjuna University, Guntur. |
| 29 | 20th April to 28th May, 2016 | Six week “Faculty Industry Training Program” on “design and 3D Printing of Housing for LED Corridor Lamp” | M/s. Efftronics Systems Pvt. Ltd., Vijayawada. |
| 30 | 6th June 2016 | A One day workshop on “World Environment day” | Institution of Engineers India Vijayawada Local Centre. |
| 31 | 20th to 24th June 2016 | One week GIAN Course on "3D Printing and Additive Manufacturing” (Course code: 151036L03) | National Institute of Technology, Warangal. |
| 32 | 29th to 30th September 2016 | Two day national Seminar on “March to Make in India through Engineering Advancements” | RVR&JC college of Engineering, Guntur. |
| 33 | 10th and 11th November 2016 | Two day Faculty Development Program on “Powder metallurgy & Particulate Materials – Fundamentals and Industrial applications” | PVPSIT, Vijayawada. |
| 34 | 5th to 10th June 2017 | A One week Faculty Development Program on “3D Printing in Engineering Education” under PMMMNMTT | National Institute of Technology, Warangal. |
| 35 | 5th to 10th March 2018 | A short term course on “Ultra Precision Machine Tools – Design and Characterization | IIT Madras |
| 36 | 21st and 22nd March 2018 | Indo-Australian Workshop on “Advances in Materials and Additive Manufacturing (AM)2 in association with DEAKIN UNIVERSITY, Australia | IIT Madras |
| 37 | 18th and 19th May 2018 | National Workshp on Advances in Automotive Electronics | SRM University, Chennai |
| 38 | 11th August 2018 | One day workshop on "Characterisation of Metal Matrix Composites" | I.E.India - A.P. State Centre & Gudlavalleru Engineering College. |
| 39 | 31st August and 1st September, 2018 | A two day National level seminar on 3D Printing Technology - Innovations in clinical Biomedical Field | G.N.I.T. Hyderabad |
| 40 | 23rd to 27th October, 2018 | A Five day Faculty Development Program on "Product Development on 3D Experience" | APSSDC, Dassault Systemes Swarnandhra Engineering college, Narsapuram |
| 41 | 5th to 9th October, 2019 | A ONE WEEK Faculty Development Program on "Product Re-Engineering" |
Gayatri Vidya Parishad College of Engineering, Visakhapatnam
|
| 42 | 23rd to 25th January, 2020 | A Three day Faculty Development Program at R & D labs of M/s. dassault Systemes, Pune | APSSDC & Dassault Systemes, Pune |
7. Training/Conferences/Seminar/Summer School/Winter School Conducted
|
Sl. No. |
Year |
Title |
Duration |
Sponsoring Agencies |
|
1 |
2010 |
Convener, Horizon2K10, a national level technical symposium organized by the Department of Mechanical engineering, Guntur Engineering College, Guntur. | 1 Day | GEC |
|
2 |
2011 |
Convener, DESPROTH ’11, A National level students Technical Symposium on “Recent Advances in Mechanical Engineering” at Department of Mechanical Engineering, Guntur Engineering College, Guntur. |
1 Day |
GEC |
| 3 | 2017 | A One day workshop on 3D Printing (for Students) on 23rd February, 2017. | 1 Day | VVIT |
| 4 | 2017 | A Two day workshop on 3D Printing and Reverse Egineering (for Faculty) from 27th to 28th April, 2017. | 2 Days | VVIT |
| 5 | 2017 | Coordinator, One day workshop on Value Engineering in association with INVEST-SZC | 1 Day | VVIT |
| 6 | 2018 | Coconvener, A Three day Faculty Development Program on "Product Development on 3D Experience" from 20th to 23rd November, 2018 | 3Days | VVIT |
| 7 | 2019 | CoConvener, A Two day Faculty Devlopment Program on "Product Re-Engineering" from 6th to 7th, May, 2019, organized by APSSDC in association with M/s. Dassault Systemes | 2 Days | VVIT |
| 8 | 2019 | Coordinator, One day Seminar on Value Engineering in association with INVEST-SZC | 1 Day | VVIT |
| 9 | 2020 | A one week faculty development program on "Advances and Recent Trends in Additive Manufacturing" (ARTAM) sponsored by ATAL - AICTE from 21st to 25th September, 2020 | One Week | VVIT |
Guest Lectures Delivered
| Sl. No. | Program | Organized by | Dates |
| 1 | Two day Faculty Development Programme on “Applications of Manufacturing Technologies for Make in India” |
Pragati Engineering College, Kakinada | 2nd January 2016 |
| 2 | Faculty Development Programme on “Rapid Prototyping” |
PBR Visvodaya Institute of Technology and Science, Kavali | 8th June 2016 |
| 3 | Five day Faculty Development Program on "Recent Trends in Manufacturing Engineering" | Narayana Engineering College, Gudur | 26th December, 2017 |
| 4 | 3rd and 4th Year students of Mechanical Engineering Department | Aditya College of Engineering & Technology, Kakinada | 10th January, 2019 |
| 5 | One Day Workshop on "Additive Manufacturing" | Narayana Engineering College, Gudur | 26th September, 2019 |
| 6 | A ONE WEEK Faculty Development Program on "Product Re-Engineering" |
APSSDC, Dassault Systemes
Gayatri Vidya Parishad College of Engineering, Visakhapatnam
|
5th to 9th October, 2019 |
| 7 | A Two week Faculty Development Program on "Emerging Technologies and Challenges in Mechanical Engineering" |
RVR&JCCE
AICTE
|
21st October to 2nd November, 2019 |
Projects Guided
| Sl. No. | Program | Name of the student | Institution | Degree Status |
| 1 | M. Tech. | Mrs. M L Vinitha | Nimra College of Engineering, Vijayawada | Awarded 2012 |
| 2 | M. Tech. | Mr. Nagabhushanam | V V I T, Guntur | Awarded 2018 |
| 3 | Ph.D. | Mr. Ganzi Suresh | K L E F (Deemed University), Guntur | Awarded 2019 |
| 4 | Ph.D. | Mr. Y. Pratapa Reddy | K L E F (Deemed University), Guntur | Running |
| 5 | M. Tech. | Mr. Sk. Jhony Basha | V V I T, Guntur | Awarded 2019 |
| 6 | Ph.D. | Mr. D. V. Seshagiri Rao | Annamalai University, Chidambaram, Tamilnadu | Running |
| 7 | Ph.D. | Ms. K. Jyothi Padmaja | K L E F (Deemed University), Guntur | Running |
| 8 | M. Tech. | Mr. B. Sivaramakrishna Reddy | V V I T, Guntur | Awarded 2022 |
Patents
| Sl. No. | Reference | Title of the patent | Type of Patent | Date | Status |
| 1 | Application No. 202041053985 | DISSOLVABLE CUSTOMIZED NON-LOAD BEARING IMPLANTS WITH FIXING SCREWS AND METHODS THEREOF | Concept / Utility | 01/01/2021 | Published |
| 2 | Grant No. 99891, Application No. 334865-001 | Bellow Air Pump | Design | 14-07-2021 | AWARDED |
| 3 | Grant No. 102974, Application No. 335497-001 |
Height Adjustble Table | Design | 01-10-2021 | AWARDED |
| 4 | Grant No. 104716, Application No. 334866-001 |
Adjustable size book stand | Design | 12-11-2021 | AWARDED |
| 5 | Grant No. 109653, Application No. 356218-001 | Pot Moulding Machine | Design | 02-03-2022 | AWARDED |
| 6 | Grant No. 109758, Application No. 356219-001 | Cup Holder | Design | 03-03-2022 | AWARDED |
| 7 | Grant No. 112894, Application No. 335498-001 | Adjustable curved wedge cam | Design | 02-05-2022 | AWARDED |
Distinctions
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Online courses completed
| Sl. No. | Title | Organized by | Year | Performance |
| 1 | Product Design and Development | NPTEL | 2017 | Elite |
| 2 | Manufacturing of Composites | NPTEL | 2017 | Elite |
| 3 | Metal Cutting and Machine Tools | NPTEL | 2018 | Elite |
| 4 | Basic Spoken Sanskrit | NPTEL | 2018 | Elite |
| 5 | Rapid Manufacturing | NPTEL | 2019 | Elite |
| 6 | Product Development using Value Engineering | NPTEL | 2019 | Elite + Silver |
| 7 | Intermediate level of Spoken Sanskrit | NPTEL | 2019 | Elite + Silver |
| 8 | Automation in Manufacturing | NPTEL | 2020 | Elite + Silver |
| 9 | Manufacturing Systems Technology I & II | NPTEL | 2020 | Elite + Silver |
| 10 | 3D Printing Revolution | Coursera | 2020 | -- |
| 11 | Materials Science: 10 Things Every Engineer Should Know | Coursera | 2020 | -- |
| 12 | 3D Printing Software | Coursera | 2020 | -- |
| 13 | 3D Printing Hardware | Coursera | 2020 | -- |
| 14 | Enhancing Clean, Green, and Smart Learning Spaces in & around the Campus | IUCEE & Canvas | 2021 | -- |
| 15 | Mechanics of Machining | NPTEL | 2021 | Elite |
| 16 | Manufacturing Process Technology I & II | NPTEL | 2021 | Elite |
| 17 | Advanced level of Spoken Sanskrit | NPTEL | 2022 | Elite + Silver |
| 18 | Engineering Design for Circular Economy | IUCEE & EDX | 2022 | -- |
| 19 | Fundamentals of Additive Manufacturing | NPTEL | 2022 | Elite + Silver, Top 5% in the country |
| 20 | Metal Additive Manufacturing | NPTEL | 2022 | Elite + Silver |
